We moved our repositories to BitBucket!

If you can't login or you can't register to the forums do not rise an issue, instead please write to support (at) l2jserver.com

Check our wiki!

Report server issues here

Forum has been updated to phpBB 3.2, let's see if this fixes some minor bugs we had.

Thank you for visiting http://www.l2jserver.com/

Geodata Usage & Installation

Support for the latest build of L2J Server, get help here with installations, upgrades, problems.
Do not post bugs reports here, use viewforum.php?f=77 instead.
There is no support for other server builds than the official provided by l2jserver.com
Forum rules
READ NOW: L2j Forums Rules of Conduct
Post Reply
FunBeast
Posts: 29
Joined: Sun Nov 13, 2011 7:18 am

Geodata Usage & Installation

Post by FunBeast » Tue Oct 20, 2015 9:16 pm

My Server (High Five)is making progress but im at a point i never used before - geodata. I did a complete fresh installation and followed all steps of the installation guide from this forum but now im having trouble with mobs being aggro through walls and walking right through them and i guess thats because of missing geodata, same for falling right through the worldgrid when jumping off small edges and/or cliffs - but how to install/use it?
In the installation guide viewtopic.php?f=81&t=30556 is nothing about installing or copying the geodata pack into the server folder.

Would it be enough to simply extract it into the server folder or do i have to run some kind of installation routine to get use to it?

Server is up and running fine and the only problem is with non-existend barriers called walls. Seven Signs is impossible cause all mobs attack at once through the rooms walls.

User avatar
Aikimaniac
L2j Inner Circle
L2j Inner Circle
Posts: 3046
Joined: Sun Aug 07, 2005 11:42 pm
Location: Slovakia

Re: Geodata Usage & Installation

Post by Aikimaniac » Tue Oct 20, 2015 10:55 pm

Can you post your geodata.properties here?
Image

FunBeast
Posts: 29
Joined: Sun Nov 13, 2011 7:18 am

Re: Geodata Usage & Installation

Post by FunBeast » Wed Oct 21, 2015 9:08 am

# Pathfinding options:
# 0 = Disabled
# 1 = Enabled using path node files
# 2 = Enabled using geodata cells at runtime
# Default: 0
PathFinding = 2

# Pathnode directory
# Default: data/pathnode
PathnodeDirectory = data/pathnode

# Pathfinding array buffers configuration
PathFindBuffers = 100x6;128x6;192x6;256x4;320x4;384x4;500x2

# Weight for nodes without obstacles far from walls
LowWeight = 0.5

# Weight for nodes near walls
MediumWeight = 2

# Weight for nodes with obstacles
HighWeight = 3

# Angle paths will be more "smart", but in cost of higher CPU utilization
AdvancedDiagonalStrategy = True

# Weight for diagonal movement. Used only with AdvancedDiagonalStrategy = True
# Default: LowWeight * sqrt(2)
DiagonalWeight = 0.707

# Maximum number of LOS postfilter passes, 0 will disable postfilter.
# Default: 3
MaxPostfilterPasses = 3

# Path debug function.
# Nodes known to pathfinder will be displayed as adena, constructed path as antidots.
# Number of the items show node cost * 10
# Potions display path after first stage filter
# Red potions - actual waypoints. Green potions - nodes removed by LOS postfilter
# This function FOR DEBUG PURPOSES ONLY, never use it on the live server !
DebugPath = False

# True = Loads GeoData buffer's content into physical memory.
# False = Does not necessarily imply that the GeoData buffer's content is not resident in physical memory.
# Default: True
ForceGeoData = True

# This setting controls Client <--> Server Player coordinates synchronization:
# -1 - Will synchronize only Z from Client --> Server. Default when no geodata.
# 1 - Synchronization Client --> Server only. Using this option (without geodata) makes it more difficult for players to bypass obstacles.
# 2 - Intended for geodata (at least with cell-level pathfinding, otherwise can you try -1).
# Server sends validation packet if client goes too far from server calculated coordinates.
# Default: -1
CoordSynchronize = -1

# Geodata files folder
GeoDataPath = ./data/geodata

# True: Try to load regions not specified below(won't disturb server startup when file does not exist)
# False: Don't load any regions other than the ones specified with True below
TryLoadUnspecifiedRegions = True

User avatar
maneco2
Advanced User
Advanced User
Posts: 632
Joined: Sat Aug 24, 2013 7:10 am

Re: Geodata Usage & Installation

Post by maneco2 » Wed Oct 21, 2015 10:08 am

Geodata full anabled need 3GB Ram minimum...
https://github.com/L2J/L2J_Server/wiki/Geodata
SPOILER:

Code: Select all

# ---------------------------------------------------------------------------
# GeoData
# ---------------------------------------------------------------------------

# Pathfinding options:
# 0 = Disabled
# 1 = Enabled using path node files
# 2 = Enabled using geodata cells at runtime
# Default: 0
PathFinding = 2

# Pathnode directory
# Default: data/pathnode
PathnodeDirectory = data/pathnode

# Pathfinding array buffers configuration
PathFindBuffers = 100x6;128x6;192x6;256x4;320x4;384x4;500x2

# Weight for nodes without obstacles far from walls
LowWeight = 0.5

# Weight for nodes near walls
MediumWeight = 2

# Weight for nodes with obstacles
HighWeight = 3

# Angle paths will be more "smart", but in cost of higher CPU utilization
AdvancedDiagonalStrategy = True

# Weight for diagonal movement. Used only with AdvancedDiagonalStrategy = True
# Default: LowWeight * sqrt(2) 
DiagonalWeight = 0.707

# Maximum number of LOS postfilter passes, 0 will disable postfilter.
# Default: 3
MaxPostfilterPasses = 3

# Path debug function.
# Nodes known to pathfinder will be displayed as adena, constructed path as antidots.
# Number of the items show node cost * 10
# Potions display path after first stage filter
# Red potions - actual waypoints. Green potions - nodes removed by LOS postfilter
# This function FOR DEBUG PURPOSES ONLY, never use it on the live server !
DebugPath = False

# True = Loads GeoData buffer's content into physical memory.
# False = Does not necessarily imply that the GeoData buffer's content is not resident in physical memory.
# Default: True
ForceGeoData = False

# This setting controls Client <--> Server Player coordinates synchronization:
# -1 - Will synchronize only Z from Client --> Server. Default when no geodata.
# 1 - Synchronization Client --> Server only. Using this option (without geodata) makes it more difficult for players to bypass obstacles.
# 2 - Intended for geodata (at least with cell-level pathfinding, otherwise can you try -1).
# Server sends validation packet if client goes too far from server calculated coordinates.
# Default: -1
CoordSynchronize = 2

# Geodata files folder
GeoDataPath = ./data/geodata

# True: Try to load regions not specified below(won't disturb server startup when file does not exist)
# False: Don't load any regions other than the ones specified with True below
TryLoadUnspecifiedRegions = True

# List of regions to be required to load
# eg.:
# Both regions required
# 22_22=True
# 19_20=true
# Exclude region from loading
# 25_26=false
# True: Region is required for the server to startup
# False: Region is not considered to be loaded

FunBeast
Posts: 29
Joined: Sun Nov 13, 2011 7:18 am

Re: Geodata Usage & Installation

Post by FunBeast » Wed Oct 21, 2015 1:43 pm

maneco2 wrote:Geodata full anabled need 3GB Ram minimum...
https://github.com/L2J/L2J_Server/wiki/Geodata
SPOILER:

Code: Select all

# ---------------------------------------------------------------------------
# GeoData
# ---------------------------------------------------------------------------

# Pathfinding options:
# 0 = Disabled
# 1 = Enabled using path node files
# 2 = Enabled using geodata cells at runtime
# Default: 0
PathFinding = 2

# Pathnode directory
# Default: data/pathnode
PathnodeDirectory = data/pathnode

# Pathfinding array buffers configuration
PathFindBuffers = 100x6;128x6;192x6;256x4;320x4;384x4;500x2

# Weight for nodes without obstacles far from walls
LowWeight = 0.5

# Weight for nodes near walls
MediumWeight = 2

# Weight for nodes with obstacles
HighWeight = 3

# Angle paths will be more "smart", but in cost of higher CPU utilization
AdvancedDiagonalStrategy = True

# Weight for diagonal movement. Used only with AdvancedDiagonalStrategy = True
# Default: LowWeight * sqrt(2) 
DiagonalWeight = 0.707

# Maximum number of LOS postfilter passes, 0 will disable postfilter.
# Default: 3
MaxPostfilterPasses = 3

# Path debug function.
# Nodes known to pathfinder will be displayed as adena, constructed path as antidots.
# Number of the items show node cost * 10
# Potions display path after first stage filter
# Red potions - actual waypoints. Green potions - nodes removed by LOS postfilter
# This function FOR DEBUG PURPOSES ONLY, never use it on the live server !
DebugPath = False

# True = Loads GeoData buffer's content into physical memory.
# False = Does not necessarily imply that the GeoData buffer's content is not resident in physical memory.
# Default: True
ForceGeoData = False

# This setting controls Client <--> Server Player coordinates synchronization:
# -1 - Will synchronize only Z from Client --> Server. Default when no geodata.
# 1 - Synchronization Client --> Server only. Using this option (without geodata) makes it more difficult for players to bypass obstacles.
# 2 - Intended for geodata (at least with cell-level pathfinding, otherwise can you try -1).
# Server sends validation packet if client goes too far from server calculated coordinates.
# Default: -1
CoordSynchronize = 2

# Geodata files folder
GeoDataPath = ./data/geodata

# True: Try to load regions not specified below(won't disturb server startup when file does not exist)
# False: Don't load any regions other than the ones specified with True below
TryLoadUnspecifiedRegions = True

# List of regions to be required to load
# eg.:
# Both regions required
# 22_22=True
# 19_20=true
# Exclude region from loading
# 25_26=false
# True: Region is required for the server to startup
# False: Region is not considered to be loaded

that shouldnt be any problem - Server is running on a machine with 16GB RAM


EDIT:

Looks like its working now - thx for the advice and the link^^

User avatar
Zoey76
L2j Inner Circle
L2j Inner Circle
Posts: 6934
Joined: Tue Aug 11, 2009 3:36 am

Re: Geodata Usage & Installation

Post by Zoey76 » Thu Oct 22, 2015 2:22 am

I add articles to the wiki for common problems, please always refer to the wiki first.
Using Eclipse 4.14 - OpenJDK11 - MariaDB 10.4 - L2J Server 2.6.1.0

Post Reply