Gameserver connection

[Neuronet]

If you want to receive support we need this info to help you properly.
» Find Revision
L2J Revision Number:4533M
L2JDP Revision Number:7851M

My problem is that i can access the login server but when i get to the server selection i see the server and it is online but have 9999 ping so i can join it.The only way to get on the gameserver it is use 127.0.0.1 as an ip adress so only i can log in.I use my ip adress from ipconfig because i have a router so that l2.ini have the same ip my friends i give them the ip from www.whatismyip.com and they had the same problem cant pass the server selection.

if it is neccesery my router is D-Link 2650U i have AVG Internet Security

I would to have some help please thank you very much!!!!!

Sorry for my bad English.

[Flashy]

edit your ipconfig.xml from gameserver. (the ip adresses in there should match with yours)
if you want allow players from outside your network, config port forwarding with your gameserver port to your pc on your router. set in ipconfig.xml the public ip adress from your router..(ip from www.whatismyip.com)

[Neuronet]

this is my login server settings

Code: Select all

# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = 10.0.0.1 # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = 10.0.0.1 # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15 # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = True # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver # Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =URL = jdbc:mysql://localhost/l2jdb # Database user info (default is "root" but it's not recommended)Login = root # Database connection passwordPassword = root # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False  

this is the game server settings

Code: Select all

# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the ipconfig.xml# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 10.0.0.1 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = 10.0.0.1 # Default: 7777GameserverPort = 7777 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver # Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =URL = jdbc:mysql://localhost/l2jdb # Database user info (default is "root" but it's not recommended)Login = root # Database connection passwordPassword = root # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216 # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7  

and this is the ipconfig

Code: Select all

<?xml version="1.0" encoding="UTF-8"?><!-- Externalhost here (Internet IP) or Localhost IP for local test --><gameserver address="10.0.0.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd">    <!-- Localhost here -->    <define subnet="127.0.0.0/8" address="10.0.0.1" />    <!-- Internalhosts here (LANs IPs) -->    <define subnet="10.0.0.0/8" address="10.0.0.0" />    <define subnet="172.16.0.0/19" address="172.16.0.0" />    <define subnet="192.168.0.0/16" address="10.0.0.1" /></gameserver>

the ip 10.0.01 is from the ipconfig
if you need the ip from whatismyip so it is 109.64.13.17

please help me i only can get throw the login screen and then i see the server online with 9999 ping

[hope]

this is my login server settings

Code: Select all

# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = 10.0.0.1 # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = 10.0.0.1 # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15 # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = True # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver # Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =URL = jdbc:mysql://localhost/l2jdb # Database user info (default is "root" but it's not recommended)Login = root # Database connection passwordPassword = root # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False  

this is the game server settings

Code: Select all

# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the ipconfig.xml# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 10.0.0.1 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = 10.0.0.1 # Default: 7777GameserverPort = 7777 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver # Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =URL = jdbc:mysql://localhost/l2jdb # Database user info (default is "root" but it's not recommended)Login = root # Database connection passwordPassword = root # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216 # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7  

and this is the ipconfig

Code: Select all

<?xml version="1.0" encoding="UTF-8"?><!-- Externalhost here (Internet IP) or Localhost IP for local test --><gameserver address="10.0.0.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd">    <!-- Localhost here -->    <define subnet="127.0.0.0/8" address="10.0.0.1" />    <!-- Internalhosts here (LANs IPs) -->    <define subnet="10.0.0.0/8" address="10.0.0.0" />    <define subnet="172.16.0.0/19" address="172.16.0.0" />    <define subnet="192.168.0.0/16" address="10.0.0.1" /></gameserver>

the ip 10.0.01 is from the ipconfig
if you need the ip from whatismyip so it is 109.64.13.17

please help me i only can get throw the login screen and then i see the server online with 9999 ping

leave configs default only edit ipconfig what you have done there is all wrong

[Neuronet]

I need to make the server that everyone can connect and me too.so my question is editing only the ipxonfig file and leave the other configs default.
And can you tell me what I need to edit in the ipconfig file

[Flashy]

I need to make the server that everyone can connect and me too.so my question is editing only the ipxonfig file and leave the other configs default.
And can you tell me what I need to edit in the ipconfig file

login server host for in loginserver config set to public ip
config.xml. gameserver public ip set to public ip

rest as hope said.. leave default. dont change it.
..and configure your router whats it...

[seires]

Do what hope said. Leave all settings in server.properties and login.properties default.

Only edit this:

Code: Select all

<?xml version="1.0" encoding="UTF-8"?><!-- Externalhost here (Internet IP) or Localhost IP for local test --><gameserver address="YOUR_EXTERNAL_IP_HERE" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd">    <!-- Localhost access -->    <define subnet="127.0.0.0/8" address="127.0.0.1" />    <!-- Internalhosts here (LANs IPs) -->    <define subnet="10.0.0.0/8" address="10.0.0.0" />    <define subnet="172.16.0.0/19" address="172.16.0.0" />    <define subnet="192.168.0.0/16" address="192.168.0.0" /></gameserver>

[tukune]

the ip 10.0.01 is from the ipconfig
if you need the ip from whatismyip so it is 109.64.13.17

your ipconfig.xml is

<?xml version="1.0" encoding="UTF-8"?>
<!-- Externalhost here (Internet IP) or Localhost IP for local test -->
<gameserver address="109.64.13.17" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd">
<!-- Localhost here -->
<define subnet="127.0.0.0/8" address="127.0.0.1" />
<!-- Internalhosts here (LANs IPs) -->
<define subnet="10.0.0.0/8" address="10.0.0.1" />
<define subnet="172.16.0.0/19" address="172.16.0.0" />
<define subnet="192.168.0.0/16" address="192.168.0.1" />
</gameserver>

your loginserver.properties

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = *

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

and server.properties

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 127.0.0.1

# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014

# Bind address for gameserver. You should not need to change it in most cases.
# Default: * (0.0.0.0)
GameserverHostname = *

# Default: 7777
GameserverPort = 7777