L2J Server

Code: Select all

SEVERE: FATAL: Failed to start the Game Server Listener. Reason: Cannot assign requested address: JVM_Bindjava.net.BindException: Cannot assign requested address: JVM_Bindat java.net.PlainSocketImpl.socketBind(Native Method)at java.net.PlainSocketImpl.bind(Unknown Source)at java.net.ServerSocket.bind(Unknown Source)at java.net.ServerSocket.<init>(Unknown Source)at com.l2jserver.loginserver.FloodProtectedListener.<init>(FloodProtectedListener.java:52)at com.l2jserver.loginserver.GameServerListener.<init>(GameServerListener.java:37)at com.l2jserver.loginserver.L2LoginServer.<init>(L2LoginServer.java:177)at com.l2jserver.loginserver.L2LoginServer.main(L2LoginServer.java:56)

Code: Select all

# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = tonybserv.dyndns-server.com # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = tonybserv.dyndns-server.com # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15  # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = False # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50  # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0  # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True  # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False

Code: Select all

# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the ipconfig.xml# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 127.0.0.1 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = * # Default: 7777GameserverPort = 7777  # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216  # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7

Code: Select all

<?xml version="1.0" encoding="UTF-8"?><!-- Externalhost here (Internet IP) or Localhost IP for local test --><gameserver address="tonybserv.dyndns-server.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd">    <!-- Localhost here -->    <define subnet="127.0.0.0/8" address="tonybserv.dyndns-server.com"/>    <!-- Internalhosts here (LANs IPs) -->    <define subnet="10.0.0.0/8" address="10.0.0.0" />    <define subnet="172.16.0.0/19" address="172.16.0.0" />    <define subnet="192.168.0.0/16" address="tonybserv.dyndns-server.com"/></gameserver>

Code: Select all

# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = 192.168.1.2 # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = 192.168.1.2 # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15  # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = False # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50  # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0  # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True  # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False

Code: Select all

# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the ipconfig.xml# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 192.168.1.2 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = 192.168.1.2 # Default: 7777GameserverPort = 7777  # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216  # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7

Code: Select all

<?xml version="1.0" encoding="UTF-8"?><!-- Externalhost here (Internet IP) or Localhost IP for local test --><gameserver address="tonybserv.dyndns-server.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd"><!-- Localhost here --><define subnet="127.0.0.0/8" address="127.0.0.1"/><!-- Internalhosts here (LANs IPs) --><define subnet="10.0.0.0/8" address="10.0.0.0" /><define subnet="172.16.0.0/19" address="172.16.0.0" /><define subnet="192.168.0.0/16" address="192.168.1.2"/></gameserver>

Code: Select all

# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = 192.168.1.32 # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = 192.168.1.32 # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15  # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = False # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50  # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword =  # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0  # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True  # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False

Code: Select all

# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the [color=#FF0000]ipconfig.xml[/color]# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 192.168.1.32 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = 192.168.1.32 # Default: 7777GameserverPort = 7777 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver # Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =URL = jdbc:mysql://localhost/l2jdb # Database user info (default is "root" but it's not recommended)Login = root # Database connection passwordPassword =  # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216 # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7  

Code: Select all

<?xml version="1.0" encoding="UTF-8"?><!-- Externalhost here (Internet IP) or Localhost IP for local test --><gameserver address="****.no-ip.org" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd">    <!-- Localhost here -->    <define subnet="127.0.0.0/8" address="127.0.0.1" />    <!-- Internalhosts here (LANs IPs) -->    <define subnet="10.0.0.0/8" address="10.0.0.0" />    <define subnet="172.16.0.0/19" address="172.16.0.0" />    <define subnet="192.168.0.0/16" address="192.168.1.32" /></gameserver>

Code: Select all

# Copyright (c) 1993-2009 Microsoft Corp.## This is a sample HOSTS file used by Microsoft TCP/IP for Windows.## This file contains the mappings of IP addresses to host names. Each# entry should be kept on an individual line. The IP address should# be placed in the first column followed by the corresponding host name.# The IP address and the host name should be separated by at least one# space.## Additionally, comments (such as these) may be inserted on individual# lines or following the machine name denoted by a '#' symbol.## For example:##      102.54.94.97     rhino.acme.com          # source server#       38.25.63.10     x.acme.com              # x client host # localhost name resolution is handled within DNS itself.#   127.0.0.1       localhost#   ::1             localhost ****.no-ip.org L2authd.lineage2.com