Support for the latest build of L2J Server, get help here with installations, upgrades, problems.
Do not post bugs reports here, use viewforum.php?f=77 instead. There is no support for other server builds than the official provided by l2jserver.com
If you want to receive support we need this info to help you properly. » Find Revision
L2J Revision 4521:
L2JDP Revision 7829:
Sorry to start a new topic, but have a feeling that I was ignored.
Three days of fighting with this error:
# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = tonybserv.dyndns-server.com # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = tonybserv.dyndns-server.com # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15 # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = False # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False
# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the ipconfig.xml# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 127.0.0.1 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = * # Default: 7777GameserverPort = 7777 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216 # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7
# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = 192.168.1.2 # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = 192.168.1.2 # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15 # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = False # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False
# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the ipconfig.xml# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 192.168.1.2 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = 192.168.1.2 # Default: 7777GameserverPort = 7777 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = 565347 # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216 # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7
<?xml version="1.0" encoding="UTF-8"?><!-- Externalhost here (Internet IP) or Localhost IP for local test --><gameserver address="tonybserv.dyndns-server.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd"><!-- Localhost here --><define subnet="127.0.0.0/8" address="127.0.0.1"/><!-- Internalhosts here (LANs IPs) --><define subnet="10.0.0.0/8" address="10.0.0.0" /><define subnet="172.16.0.0/19" address="172.16.0.0" /><define subnet="192.168.0.0/16" address="192.168.1.2"/></gameserver>
GS and LS are configured correctly and successfully launched.
Now client can not connect to the LS from external network. What's the problem?
Configs above.
Hosts don't support binding one hostname to another, can't do dyn-dns through hosts.
If you have problems, FIRST TRY SOLVING THEM YOURSELF, and if you get errors, TRY TO ANALYZE THEM, and ONLY if you can't help it, THEN ask here.
Otherwise you will never learn anything if all you do is copy-paste! Discussion breeds innovation.
# ---------------------------------------------------------------------------# Login Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs# Default: *LoginserverHostname = 192.168.1.32 # Default: 2106LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs# Default: *LoginHostname = 192.168.1.32 # The port on which login will listen for GameServers# Default: 9014LoginPort = 9014 # The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)# Default: 15IpUpdateTime = 15 # ---------------------------------------------------------------------------# Security# ---------------------------------------------------------------------------# Default: TrueLogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned.# Default: 10LoginTryBeforeBan = 10 # Time you won't be able to login back again after LoginTryBeforeBan tries to login.# Default: 600 (10 minutes)LoginBlockAfterBan = 600 # If set to True any GameServer can register on your login's free slots# Default: FalseAcceptNewGameServer = False # Enforce GameGuard authorization from client?# If True, login server will kick client if the client bypassed GameGuard authentication.# Default: FalseForceGGAuth = False # Flood Protection. All values are in MILISECONDS.# Default: TrueEnableFloodProtection = True # Default: 15FastConnectionLimit = 15 # Default: 700NormalConnectionTime = 700 # Default: 350FastConnectionTime = 350 # Default: 50MaxConnectionPerIP = 50 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver# Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = URL = jdbc:mysql://localhost/l2jdb# Database user info (default is "root" but it's not recommended)Login = root# Database connection passwordPassword = # Default: 10MaximumDbConnections = 10 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc.# ---------------------------------------------------------------------------# If False, the license (after the login) will not be shown.# Default: TrueShowLicence = True # Default: TrueAutoCreateAccounts = True # ---------------------------------------------------------------------------# Developer Settings# ---------------------------------------------------------------------------# Default: FalseDebug = False # Default: FalseAssert = False # Default: FalseDeveloper = False
# ---------------------------------------------------------------------------# Game Server Settings# ---------------------------------------------------------------------------# This is the server configuration file. Here you can set up the connection information for your server.# This was written with the assumption that you are behind a router.# Dumbed Down Definitions...# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.# ---------------------------------------------------------------------------# Networking# ---------------------------------------------------------------------------## Note: External/Internal address definitions was moved to the [color=#FF0000]ipconfig.xml[/color]# # Where's the Login server this gameserver should connect to# Default: 127.0.0.1LoginHost = 192.168.1.32 # TCP port the login server listen to for gameserver connection requests# Default: 9014LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases.# Default: * (0.0.0.0)GameserverHostname = 192.168.1.32 # Default: 7777GameserverPort = 7777 # ---------------------------------------------------------------------------# Database# ---------------------------------------------------------------------------# Specify the appropriate driver and url for the database you're using.# Examples:# Driver = com.mysql.jdbc.Driver (default)# Driver = org.hsqldb.jdbcDriver# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriverDriver = com.mysql.jdbc.Driver # Database URL# URL = jdbc:mysql://localhost/l2jdb (default)# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =URL = jdbc:mysql://localhost/l2jdb # Database user info (default is "root" but it's not recommended)Login = root # Database connection passwordPassword = # Default: 100MaximumDbConnections = 100 # Default: 0MaximumDbIdleTime = 0 # ---------------------------------------------------------------------------# Misc Server Settings# ---------------------------------------------------------------------------# This is the server ID that the Game Server will request.# Example: 1 = Bartz# Default: 1RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved.# Default: TrueAcceptAlternateID = True # Datapack root directory.# Defaults to current directory from which the server is started unless the below line is uncommented.#DatapackRoot = C:/Work/tmp/DataPack # Define how many players are allowed to play simultaneously on your server.# Default: 100MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect.# Delimiter is ;# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u># Default: 216AllowedProtocolRevisions = 216 # ---------------------------------------------------------------------------# Misc Player Settings# --------------------------------------------------------------------------- # Character name template.# Examples:# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*# The above setting will allow names with first capital letter, next three small letters,# and any letter (case insensitive) or number, like OmfgWTF1# CnameTemplate = [A-Z][a-z]*# The above setting will allow names only of letters with first one capital, like Omfgwtf# Default .* (allows any symbol)CnameTemplate = .* # This setting restricts names players can give to their pets.# See CnameTemplate for detailsPetNameTemplate = .* # Maximum number of characters per account.# Default: 7 (client limit)CharMaxNumber = 7
# Copyright (c) 1993-2009 Microsoft Corp.## This is a sample HOSTS file used by Microsoft TCP/IP for Windows.## This file contains the mappings of IP addresses to host names. Each# entry should be kept on an individual line. The IP address should# be placed in the first column followed by the corresponding host name.# The IP address and the host name should be separated by at least one# space.## Additionally, comments (such as these) may be inserted on individual# lines or following the machine name denoted by a '#' symbol.## For example:## 102.54.94.97 rhino.acme.com # source server# 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself.# 127.0.0.1 localhost# ::1 localhost ****.no-ip.org L2authd.lineage2.com
Problem solved.
It turned out that from my computer can not access the server on the external IP, because it is a router. Others have successfully come to the server.
Thank you all for help!